Can you hook up an amp without rca cables

can you hook up an amp without rca cables

How to hook up a car amplifier without an RCA jack?

There are almost three methods available to hook up your amplifier without using any RCA jacks. 1. Connect Speaker Wire To RCA Adapter This is the first method that we will use to make a connection. Using this method, you can add an amplifier to the old audio setup of your car.

How to hook up an amp to a car?

In these inputs, the voltage is higher than a standard RCA input so called the “High-Level Input”. These inputs give you clear and amazing sound quality. To hook up your amp with this method, run “Red Power Wire” from your amplifier through vehicle’s firewall, routing to the battery connect with the fuse holder.

How to hook up a subwoofer to an amp?

For every speaker or subwoofer you want to connect with amp, strip back the color-coded right and left speaker wires, and then connect the wire leading to your amplifier. 3. Hook-Up Amp Using Line Output Converter (LOC) A line output converter speaker level signals to RCA signals that are used by an amplifier.

Can you hook up an amplifier to an old head unit?

An old head unit is not useless just because of the lack of RCA jacks. You should install an additional amplifier in your car to increase the power for running speakers or subwoofers. When we move to hook up an amplifier, there are many methods available to perform this task.

How to hook up an amp without RCA jacks?

The third option to hook up an amp without RCA jacks comes in the form of a line output converter. This is a device used by many installers who have customers that don’t want to get rid of any aspect of their factory stereo – they simply want to add amplifiers and subwoofers.

What is an RCA adapter for a stock radio?

This RCA adapter for stock radio that converts the high-voltage, speaker-level signal to a preamp-level signal that’s acceptable to a power amp. A “LOC” as they are known, consists of a transformer and a high-voltage resistor, and connects to your amp using a standard RCA patch cable.

Can you plug an outboard power amp into a radio?

Because factory radios don’t have dedicated outputs for amplifiers “RCA” or “preamp outputs”, most outboard power amps come with high-level inputs, which enable you to tap into the factory speaker wires for signal flow.

Why doesn’t my amp have RCA on the back?

This comes from the system’s head unit (radio/receiver) to the amp itself, but there are times which demand a different solution, like when head unit has no RCA outputs on the back. It’s more common than you think, and if you’re reading this you’re probably in this predicament right now.

Can a combo amp be used as a head unit?

If you want to make your combo amp louder, then you may be wondering if you can use it as a head unit, and connect to a speaker. Or you may want to turn your combo amp into a head unit because you prefer how it sounds to other head units you’ve tried.

How do I connect my amp to my car stereo system?

The best way to connect it to a factory system is to tap into the stereos speaker outputs for the amps input signal. Then send the amps outputs back to the stereos harness, and on to the speakers through the factory wiring.

Can you add an amplifier to a factory stereo?

Adding an amplifier to a factory stereo often requires running a lot of new speaker wire — from the stereo to the amplifier and then from the amp to the speakers. This can feel like an impossible nightmare. Fortunately, we have a way to make it a little easier.

How do you connect a combo amp to a speaker cabinet?

This is the easiest and quickest method. If your amp has a line-out jack for speakers, then you can connect the combo amp and cabinet together. Then you can use your combo amp, in the same way as you would with a head unit, to control the tone. Don’t use your guitar cable for this.

Related posts: