Hook up bathtub drain

hook up bathtub drain

Is it hard to hook up a bathtub drain?

Hooking Up a Bathtub Drain. The most difficult part of installing the tub itself is hooking up the bathtub drain to the rough plumbing. If there is no access to the drain from behind or below, and your tub is sitting in its permanent spot, it is best to consult an expert to hook-up your drain.

How do you hook up a tail pipe to a bathtub?

Hooking Up a Bathtub Drain. Slip the compression nuts over the tail pieces of both the drain and overflow ells with the threads facing away from the tub. Push the cone washer onto the tailpipes so that the tapered side will fit into the drain tee of your rough-in plumbing, 1 to 2 inches from the end of the tailpiece.

How do you install an overflow drain on a bathtub?

Spread plumbers putty around the underside of the flange and press it down. Push this into the drain hole in the bathtub and then secure it using a nut on the underside of the bathtub. Remove the covers on the drain and the overflow drain and measure the distance.

What is the drain on a bathtub?

The drain is the circular hole at the bottom of your bathtub. This allows water to leave your tub into your plumbing and drainage system. The drain is essentially the entrance to your plumbing, and its imperative that its fitted properly and in the right place so water can leave your bathroom in the way its meant to.

Why wont my bathtub drain?

Fairly simple drain system. If you have to hold your drain lever down for the tub to drain it is more than likely the tension spring on the back of the overflow plate. You can replace just this plate at your hardware store for a few dollars.

How to replace the drain on a bathtub?

Replacing Bath Tub Drain Step 1: Choose Your Tools. Items needed to remove and replace a modern screw in bath tub drain (not all drains are like... Step 2: Remove the Old Drain. Insert the Drain Key into the drain. One side is bigger than the other so it fits several... Step 3: Clean the Seating ...

What is the hardest part of installing a bathtub?

The most difficult part of installing the tub itself is hooking up the bathtub drain to the rough plumbing. If there is no access to the drain from behind or below, and your tub is sitting in its permanent spot, it is best to consult an expert to hook-up your drain.

How do you hook up a tail pipe to a bathtub?

Hooking Up a Bathtub Drain. Slip the compression nuts over the tail pieces of both the drain and overflow ells with the threads facing away from the tub. Push the cone washer onto the tailpipes so that the tapered side will fit into the drain tee of your rough-in plumbing, 1 to 2 inches from the end of the tailpiece.

How to replace a bathtub drain?

How to Replace a Tub Drain: Step-by-Step Instructions. Using a screwdriver, remove the two screws securing the overflow plate. Using pliers, reach down to the drain show and turn counterclockwise. Depending on how old the tub is, you might have some trouble. Richard had to go in with a reciprocating saw for the 70-year-old drain.

Does a bathtub require an overflow drain?

Depending on the style of bathtub and its use, having an overflow drain is not always necessary. If your bathtub is a shower/bathtub combo or if your bathtub is a smaller model, then having an overflow drain isn’t necessary. Installing an overflow drain is also a bit more involved than installing a standard drain.

Related posts: